View MLG0603Q9N1_1280568.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

(1/6)
SMD Inductors(Coils) For High Frequency(Multilayer)
MLG Series MLG0603Q Type
FEATURES * It serializes a product of acquisition inductance 0.3 to15nH. In a product of 0.3 to 1.0nH, it realizes line up in a 0.1nH steppe. * By the most suitable design, Q is higher than competing in a conventional product MLG0603S type. In particular, Q in more than 800MHz largely improved. * Advanced monolithic structure is formed using a multilayering and sintering process with ceramic and conductive materials for high-frequency. * The products contain no lead and also support lead-free soldering. APPLICATIONS For high-frequency applications including mobile phones, high frequency modules (PA, VCO, FEM etc.), Bluetooth, W-LAN, UWB and tuners. SHAPES AND DIMENSIONS
0.60.03
Conformity to RoHS Directive
PRODUCT IDENTIFICATION MLG 0603 Q 2N2 S T (1) (2) (3) (4) (5) (6) (1) Multilayer ceramic chip coil (2) Dimensions
0603 0.6x 0.3mm (Lx W)
(3) Series name (4) Inductance value
2N2 12N 2.2nH 12nH
(5) Inductance tolerance
B C S H J 0.1nH 0.2nH 0.3nH 3% 5%
0.30.03
(6) Packaging style
T
0.060.04
Taping (reel)
SPECIFICATIONS
0.30.03
Operating temperature range Storage temperature range
Weight: 0.2mg
-55 to +125C -55 to +125C [Unit of products]
PACKAGING STYLE AND QUANTITIES
Packaging style Taping Quantity 15000 pieces/reel
0.150.05
Dimensions in mm
RECOMMENDED PC BOARD PATTERN
0.25 to 0.35
0.2 to 0.3 0.25 to 0.35 0.2 to 0.3
Dimensions in mm
RECOMMENDED SOLDERING CONDITION REFLOW SOLDERING
10s max. 250 to 260C 230C Natural cooling
HANDLING AND PRECAUTIONS * Before soldering, be sure to preheat components. The preheating temperature should be set so that the temperature difference between the solder temperature and product temperature does not exceed 150C. * After mounting components onto the printed circuit board, do not apply stress through board bending or mishandling. * When hand soldering, apply the soldering iron to the printed circuit board only. Temperature of the iron tip should not exceed 350C. Soldering time should not exceed 3 seconds.
180C 150C Preheating 60 to 120s Time(s) Soldering 30 to 60s
* Conformity to RoHS Directive: This means that, in conformity with EU Directive 2002/95/EC, lead, cadmium, mercury, hexavalent chromium, and specific bromine-based flame retardants, PBB and PBDE, have not been used, except for exempted applications. * Please contact our Sales office when your application are considered the following: The device's failure or malfunction may directly endanger human life (e.g. application for automobile/aircraft/medical/nuclear power devices, etc.)
* All specifications are subject to change without notice. 003-01 / 20070703 / e521_mlg0603q.fm
(2/6)
ELECTRICAL CHARACTERISTICS
Inductance (nH) 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0 1.1 1.2 1.3 1.4 1.5 1.6 1.7 1.8 1.9 2.0 2.1 2.2 2.3 2.4 2.5 2.6 2.7 2.8 2.9 3.0 3.1 3.2 3.3 3.4 3.5 3.6 3.7 3.8 3.9 4.0 4.3 4.7 5.1 5.6 6.2 6.8 7.5 8.2 9.1 10 12 15
Inductance tolerance 0.1, 0.2nH 0.1, 0.2nH 0.1, 0.2nH 0.1, 0.2nH 0.1, 0.2nH 0.1, 0.2nH 0.1, 0.2nH 0.1, 0.2, 0.3nH 0.1, 0.2, 0.3nH 0.1, 0.2, 0.3nH 0.1, 0.2, 0.3nH 0.1, 0.2, 0.3nH 0.1, 0.2, 0.3nH 0.1, 0.2, 0.3nH 0.1, 0.2, 0.3nH 0.1, 0.2, 0.3nH 0.1, 0.2, 0.3nH 0.1, 0.2, 0.3nH 0.1, 0.2, 0.3nH 0.1, 0.2, 0.3nH 0.1, 0.2, 0.3nH 0.1, 0.2, 0.3nH 0.1, 0.2, 0.3nH 0.1, 0.2, 0.3nH 0.1, 0.2, 0.3nH 0.1, 0.2, 0.3nH 0.1, 0.2, 0.3nH 0.1, 0.2, 0.3nH 0.1, 0.2, 0.3nH 0.1, 0.2, 0.3nH 0.1, 0.2, 0.3nH 0.1, 0.2, 0.3nH 0.1, 0.2, 0.3nH 0.1, 0.2, 0.3nH 0.1, 0.2, 0.3nH 0.1, 0.2, 0.3nH 0.1, 0.2, 0.3nH 0.1, 0.2, 0.3nH 3%, 0.3nH 3%, 0.3nH 3%, 0.3nH 3%, 0.3nH 3%, 0.3nH 3, 5% 3, 5% 3, 5% 3, 5% 3, 5% 3, 5% 3, 5%
Q min. -- -- -- -- -- -- -- 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 6 6
Test frequency L, Q (MHz) 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100
Self-resonant frequency (GHz) min. typ. 10.0 20up 10.0 20up 10.0 20up 10.0 20up 10.0 20up 10.0 17.5 10.0 16.3 10.0 14.2 10.0 14.9 10.0 14.7 10.0 13.6 9.0 12.0 9.0 10.7 9.0 11.3 8.5 10.0 8.5 10.3 7.5 8.9 7.5 9.4 7.5 8.8 7.5 9.3 7.5 10.0 7.5 9.3 7.0 9.1 6.5 8.0 6.5 7.7 6.2 7.9 6.2 7.6 6.0 7.4 6.0 7.2 6.0 7.1 5.8 7.1 5.8 7.1 5.8 6.8 5.8 7.4 5.8 7.4 5.8 7.3 5.8 7.3 5.8 7.1 5.2 6.4 5.2 6.9 5.0 6.0 4.2 5.5 4.2 5.3 4.2 5.5 3.8 4.8 3.8 4.9 3.6 4.4 3.6 4.7 3.0 3.8 3.0 3.8
DC resistance () max. 0.10 0.10 0.10 0.10 0.10 0.10 0.10 0.10 0.15 0.15 0.15 0.15 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.30 0.30 0.30 0.30 0.30 0.30 0.30 0.30 0.30 0.30 0.30 0.30 0.35 0.35 0.40 0.40 0.40 0.40 0.40 0.45 0.50 0.50 0.55 0.60 0.70 0.70 0.80 0.80 1.00 1.10 typ. 0.02 0.02 0.02 0.03 0.04 0.03 0.04 0.06 0.06 0.05 0.05 0.06 0.08 0.08 0.08 0.09 0.08 0.09 0.09 0.08 0.17 0.14 0.17 0.13 0.11 0.14 0.13 0.12 0.15 0.15 0.15 0.15 0.18 0.20 0.23 0.23 0.24 0.23 0.21 0.25 0.30 0.28 0.32 0.34 0.36 0.44 0.49 0.52 0.56 0.69
Rated current (mA)max. 600 600 600 600 600 600 600 600 550 550 550 550 550 500 500 500 500 500 500 500 450 450 450 450 450 300 300 300 300 300 300 300 300 300 300 300 300 300 300 300 250 250 250 250 220 220 200 200 180 180
Part No. MLG0603Q0N3 MLG0603Q0N4 MLG0603Q0N5 MLG0603Q0N6 MLG0603Q0N7 MLG0603Q0N8 MLG0603Q0N9 MLG0603Q1N0 MLG0603Q1N1 MLG0603Q1N2 MLG0603Q1N3 MLG0603Q1N4 MLG0603Q1N5 MLG0603Q1N6 MLG0603Q1N7 MLG0603Q1N8 MLG0603Q1N9 MLG0603Q2N0 MLG0603Q2N1 MLG0603Q2N2 MLG0603Q2N3 MLG0603Q2N4 MLG0603Q2N5 MLG0603Q2N6 MLG0603Q2N7 MLG0603Q2N8 MLG0603Q2N9 MLG0603Q3N0 MLG0603Q3N1 MLG0603Q3N2 MLG0603Q3N3 MLG0603Q3N4 MLG0603Q3N5 MLG0603Q3N6 MLG0603Q3N7 MLG0603Q3N8 MLG0603Q3N9 MLG0603Q4N0 MLG0603Q4N3 MLG0603Q4N7 MLG0603Q5N1 MLG0603Q5N6 MLG0603Q6N2 MLG0603Q6N8 MLG0603Q7N5 MLG0603Q8N2 MLG0603Q9N1 MLG0603Q10N MLG0603Q12N MLG0603Q15N
T
T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T
: Please specify inductance tolerance, B (0.1nH), C (0.2nH), S (0.3nH), H (3%) or J (5%). * Test equipment Inductance Q : HP4291A+16197A, or equivalent SRF: HP8720C, or equivalent Rdc: YOKOGAWA TYPE7561, or equivalent * Rated current : Value obtained when current flows and temperature has risen to under 20C.
* All specifications are subject to change without notice. 003-01 / 20070703 / e521_mlg0603q.fm
(3/6)
L, Q vs. FREQUENCY CHARACTERISTICS
Part No. MLG0603Q0N3 MLG0603Q0N4 MLG0603Q0N5 MLG0603Q0N6 MLG0603Q0N7 MLG0603Q0N8 MLG0603Q0N9 MLG0603Q1N0 MLG0603Q1N1 MLG0603Q1N2 MLG0603Q1N3 MLG0603Q1N4 MLG0603Q1N5 MLG0603Q1N6 MLG0603Q1N7 MLG0603Q1N8 MLG0603Q1N9 MLG0603Q2N0 MLG0603Q2N1 MLG0603Q2N2 MLG0603Q2N3 MLG0603Q2N4 MLG0603Q2N5 MLG0603Q2N6 MLG0603Q2N7 MLG0603Q2N8 MLG0603Q2N9 MLG0603Q3N0 MLG0603Q3N1 MLG0603Q3N2 MLG0603Q3N3 MLG0603Q3N4 MLG0603Q3N5 MLG0603Q3N6 MLG0603Q3N7 MLG0603Q3N8 MLG0603Q3N9 MLG0603Q4N0 MLG0603Q4N3 MLG0603Q4N7 MLG0603Q5N1 MLG0603Q5N6 MLG0603Q6N2 MLG0603Q6N8 MLG0603Q7N5 MLG0603Q8N2 MLG0603Q9N1 MLG0603Q10N MLG0603Q12N MLG0603Q15N Inductance(nH)typ. 500MHz 800MHz 0.3 0.3 0.4 0.4 0.5 0.5 0.6 0.6 0.7 0.6 0.7 0.7 0.8 0.8 0.9 0.9 1.0 1.0 1.1 1.1 1.2 1.2 1.3 1.3 1.4 1.4 1.5 1.5 1.6 1.6 1.7 1.7 1.8 1.8 1.9 1.9 2.0 2.0 2.0 2.0 2.2 2.2 2.3 2.3 2.4 2.4 2.5 2.4 2.5 2.5 2.6 2.6 2.7 2.7 2.8 2.8 2.9 2.9 3.0 3.0 3.1 3.1 3.2 3.2 3.3 3.3 3.4 3.4 3.5 3.5 3.6 3.6 3.7 3.7 3.8 3.8 4.1 4.1 4.4 4.4 4.9 4.9 5.3 5.4 5.9 5.9 6.4 6.4 7.1 7.2 7.8 7.8 8.7 8.8 9.5 9.6 11.5 11.7 14.3 14.6 1.8GHz 0.3 0.4 0.45 0.5 0.6 0.7 0.8 0.9 1.0 1.1 1.2 1.3 1.4 1.5 1.6 1.7 1.8 1.9 2.0 2.1 2.2 2.3 2.4 2.5 2.6 2.7 2.8 2.9 3.0 3.1 3.2 3.3 3.4 3.5 3.6 3.7 3.8 4.0 4.3 4.6 5.1 5.7 6.4 6.9 8.1 8.5 9.9 10.8 14.3 17.4 2.0GHz 0.3 0.4 0.45 0.5 0.6 0.7 0.8 0.9 1.0 1.1 1.2 1.3 1.4 1.5 1.6 1.7 1.8 1.9 2.0 2.1 2.2 2.3 2.4 2.5 2.6 2.7 2.9 3.0 3.1 3.2 3.3 3.4 3.5 3.6 3.7 3.8 3.9 4.0 4.4 4.7 5.3 5.9 6.6 7.1 8.5 8.8 10.4 11.3 15.5 18.8 2.4GHz 0.3 0.4 0.45 0.5 0.6 0.7 0.8 0.9 1.0 1.1 1.2 1.3 1.4 1.5 1.6 1.7 1.8 1.9 2.1 2.1 2.3 2.4 2.5 2.6 2.7 2.8 3.0 3.1 3.2 3.3 3.4 3.5 3.6 3.7 3.8 3.9 4.0 4.2 4.6 4.9 5.5 6.2 7.1 7.6 9.4 9.5 11.5 12.5 18.8 22.2 Q typ. 500MHz 17 17 15 17 17 17 18 18 16 17 17 17 17 18 19 18 20 18 19 16 17 18 18 18 17 19 19 19 18 18 18 18 17 16 18 17 17 18 17 16 17 18 17 17 17 16 17 16 16 17 800MHz 22 22 20 22 22 23 23 23 20 21 21 22 21 23 24 23 25 23 24 20 23 23 23 23 22 24 24 24 23 23 23 23 22 21 23 23 22 23 22 21 22 23 22 21 22 20 21 21 20 21 1.8GHz 36 34 31 34 35 36 36 36 32 33 33 34 33 36 38 35 40 36 37 31 36 36 35 35 33 36 36 35 34 34 34 33 32 32 34 34 33 34 32 32 32 32 31 30 29 28 27 27 24 26 2.0GHz 37 35 33 36 36 37 38 38 34 34 35 36 35 38 40 37 42 38 39 33 37 38 37 37 34 37 37 36 36 35 35 35 33 34 35 35 35 35 33 33 33 33 31 31 30 28 27 28 23 26 2.4GHz 42 39 37 39 41 42 42 43 38 39 39 41 39 42 45 41 47 42 43 36 42 42 40 40 38 41 40 39 38 38 38 37 36 37 38 38 38 38 36 36 36 35 33 33 30 29 27 28 21 24
* All specifications are subject to change without notice. 003-01 / 20070703 / e521_mlg0603q.fm
(4/6)
TYPICAL ELECTRICAL CHARACTERISTICS INDUCTANCE vs. FREQUENCY CHARACTERISTICS
100
Q vs. FREQUENCY CHARACTERISTICS
50 1.0nH
15nH
40
2.7nH 10nH
Inductance (nH)
10
10nH Q 2.7nH
30
20 1 1.0nH 10 15nH
0 10
100 Frequency(MHz)
1000
10000
0 10
100 1000 Frequency(MHz)
10000
* All specifications are subject to change without notice. 003-01 / 20070703 / e521_mlg0603q.fm
(5/6)
MLG Series MLG0603M Type (For Wireless LAN & Bluetooh)
FEATURES * Nominal inductance values are supported from 0.6 to 10nH. * Provides high Q characteristics. * Advanced monolithic structure is formed using a multilayering and sintering process with ceramic and conductive materials for high-frequency. * The products contain no lead and also support lead-free soldering. * It is a product conforming to RoHS directive. APPLICATIONS The most suitable in high frequency circuit of 2.4GHz and 5GHz wireless LAN & Bluetooh. SHAPES AND DIMENSIONS
0.60.03
PRODUCT IDENTIFICATION MLG 0603 M 2N2 B T (1) (2) (3) (4) (5) (6) (1) Series name (2) Dimensions
0603 0.6x 0.3mm (Lx W)
(3) Material code (4) Inductance value
2N2 5N6 2.2nH 5.6nH
(5) Inductance tolerance
B H 0.1nH 3%
(6) Packaging style
0.30.03
T
Taping (reel)
SPECIFICATIONS
0.060.04
Operating temperature range Storage temperature range
-55 to +125C -55 to +125C [Unit of products]
0.30.03
PACKAGING STYLE AND QUANTITIES
Packaging style Taping Quantity 15000 pieces/reel
Weight: 0.2mg
0.150.05
Dimensions in mm
RECOMMENDED PC BOARD PATTERN
0.25 to 0.35
0.2 to 0.3 0.25 to 0.35 0.2 to 0.3
Dimensions in mm
RECOMMENDED SOLDERING CONDITION REFLOW SOLDERING
HANDLING AND PRECAUTIONS * Before soldering, be sure to preheat components. The preheating temperature should be set so that the temperature difference between the solder temperature and product temperature does not exceed 150C. * After mounting components onto the printed circuit board, do not apply stress through board bending or mishandling. * When hand soldering, apply the soldering iron to the printed circuit board only. Temperature of the iron tip should not exceed 300C. Soldering time should not exceed 3 seconds.
10s max. 250 to 260C 230C Natural cooling
180C 150C Preheating 60 to 120s Time(s) Soldering 30 to 60s
* All specifications are subject to change without notice. 003-01 / 20070703 / e521_mlg0603q.fm
(6/6)
PACKAGING STYLES REEL DIMENSIONS
1.0
2.00.5 o130.5 o210.8 o1782.0
9.00.3 13.01.4
o602.0 Dimensions in mm
TAPE DIMENSIONS
Sprocket hole 1.5 +0.1 -0.0 Cavity 1.750.1 300min. Dimensions in mm 0.680.05 3.50.05 8.00.3 0.5max. 0.380.05 4.00.1 2.00.05 2.00.05 160min. Taping 200min. Drawing direction
* All specifications are subject to change without notice. 003-01 / 20070703 / e521_mlg0603q.fm

▲Up To Search▲

Price & Availability of MLG0603Q9N1

	To Download MLG0603Q9N1 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .